Primary SIC: Refrigeration And Heating Equipment
Primary NAICS: Air Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing
Manufacturing: Manufactures refrigeration and heating equipment; sheet metal fabricator

Manufacturing: sheet metal fabricator
See also: D & L Airflow Solutions

American Air Duct was started in 1982. Our main focus is the manufacturing of residential ductwork and accessory items on a volume basis. In addition, we manufacture custom, light commercial and spiral ductwork. We are also a reseller of Hart & Cooley registers, Selkirk Metalbestos venting products, and Durodyne products. We sell solely through wholesale HVAC distributors.

Manufacturer Of Pipe Fittings & Sheet Metal Work

Champion is one of the oldest producers of factory made galvanized furnace pipe, duct, and fittings. We offer a complete line of products for air distribution systems.

Our goal is to supply the installer with easy-to-install, quality HVAC components.

Since 1963, Cody Company has marketed prefabricated duct and fittings to wholesale distributors. Cody Company's residential products are designed with the ease of installation kept in mind while maintaining a superior quality of craftsmanship. Many of our products are self connecting by utilizing a button and hem lock. Many of our residential products also have the sizes embossed on the product itself.

Since 1964 Crown Products has been a leading manufacturer of air duct products for the HVAC industry. We manufacture a complete line of residential air duct products and offer a full range of rectangular, round, and spiral duct products for commercial construction.

We have 250 dedicated employees building quality and innovative air duct products. Crown service and sales representatives average 18 years of exceptional service to our customers. We look forward to servicing your needs.

Air Distribution Products: Wherever movement and venting of air is required for the home or buildings, Deflecto has Air Distribution products available to fit the application. These products are available to the end consumer, HVAC and building contractors through retail stores and wholesalers.

Founded in 1972, this Canadian Company has evolved into one of the largest and most respected manufacturers and suppliers of quality sheet metal and venting products, lending support to the HVAC industry. There are four manufacturing facilities in Ontario, three in Toronto, and one in Gravenhurst. Don Park is also represented in Atlanta, Georgia with a manufacturing facility. Our products are distributed within Canada and the United States through our contractor direct wholesale operations as well as other wholesalers and retailers.

Wholesale: Wholesales warm air heating equipment and supplies; manufactures blowers and fans; manufactures sheet metal furnace casings; manufactures refrigeration and heating equipment; manufactures heating equipment and supplies; fabricates architectural metalwork.

Our present and continued objectives are to supply our distributors with a product line that is ever consistent in exceptional quality, and delivered expeditiously at a fair market price. We will always aspire to build partnerships with our customers, employees and suppliers by pledging a system of conduct that enthusiastically embraces values that foster trust, loyalty and long standing relationships.

Our Mission:HCP will give the customer what they want when they want it at a competitive price within a safe working environment while maintaining a reasonable profit.

Our Vision: To be the preeminent leader and solution provider of sheet metal products for the HVAC industry.

We value Integrity!

In 1979, Normand Caissie started Imperial Sheet Metal Ltd, operating from a 6,400 square-foot sheet metal shop.

Today, the Imperial Manufacturing Group of Companies is a team of more than 800 people working from six locations across North America.

IMG produces more than 7,000 products for the heating, air conditioning, ventilation and building products industries.

Lukjan Metal Products has been manufacturing quality metal duct, pipe and fittings for the Heating, Ventilating and Air Conditioning (HVAC) Industry for over 39 years.

Its main manufacturing facility operates in Conneaut, Ohio conveniently located 70 miles east of Cleveland, Ohio and less than 30 miles west of Erie, PA.

M&M Manufacturing Company is a diversified sheet metal fabricator of round, rectangular, and spiral HVAC duct pipe and fittings for residential and commercial applications. M&M also offers general sheet metal products for roofing, ventilating, and architectural applications.

From a two-person shop in 1958 to today's six technologically advanced manufacturing units, M&M has developed a reputation for reliability and service second to none.

At Atco's Master-Fit we are dedicated to your comfort. Whether your are a home owner, contractor or distributor, our focus is on you.

With today's rising cost of energy and the fact that your home is your castle our Air Distribution Products are design to make your heating and air conditioning system run at its peak performance. That means your family will stay warm in the winter and cool in the summer. Be sure your contractor uses only Atco, Master-Fit products.

Master Flow Building Products manufactures and markets an array of products to service the Building Materials, HVAC and Door Hardware Industries including:

Master Flow® Ductwork – a comprehensive selection including pipe, elbows, and fittings.

Herbert R. Gibson founded Midwest Ducts in 1986, in Prairie Farm, WI. Our entire family contributed to the growth of the business over the years, and the transition to the second generation of Gibson leadership is now complete.

Today Midwest Ducts has over 4 million dollars invested in manufacturing equipment, and ships in its own trailers from the 98,000 sq ft. Prairie Farm facility. Midwest Ducts has grown to serve distributors in 14 states

Mitchell Metal Products is a family-owned company that began operations in 1924 and has been under the present ownership since 1971. We manufacture single wall duct pipe and fittings, as well as Type B gas vent pipe and fittings in the same facility. We are dedicated to providing personalized service and quality products to our customers.

Nu-Era Sheet Metal has been providing top quality sheet metal products throughout Michigan and the Midwestern United States. We manufacture and supply an extensive line of products to recognized building professionals in the sheet metal, heating and air conditioning industry. You can choose from our complete line of standard products or give us your ideas and we will build to your specifications.

For over 100 years the finest HVAC technicians and craftsmen have insisted on installing Seal-Tite^®, prefabricated galvanized duct, pipe & fittings. These contractors, their wholesalers, and our employees have contributed greatly to the growth and success of Seal-Tite^®. We thank all of those who have made the last 100 years a success and invite you to continue to share in our partnership and success in the future.

Sherer Manufacturing was founded on August 1, 1998 by Carl Sherer and David E. Hartzell as a result of the sale of Hughes Manufacturing, Inc.

Sherer distributes their products through leading HVAC wholesalers in the Southeast U.S. We currently occupy two manufacturing facilities with over 90,000 square foot total.

Southwark Metal Mfg. Co. has been manufacturing prefabricated sheet metal ducts and fittings for over 60 years. Third generation family ownership and a highly dedicated management staff are committed to providing its distributors with the finest quality products.

Southwark was founded in 1946 and is still proud to be a private, family owned company. With five state of the art manufacturing facilities it has grown to be one of the largest duct manufacturers in the United States.

Standex Air Distribution Products makes your home or office more comfortable by producing top-quality duct system components. As the leading manufacturer of galvanized pipe, duct and fittings in the United States, our 70 years of experience means our products are durable and easy to install.

The Wilkins Corporation manufactures sheet metal ducts; warm air heating & air conditioning contractor; manufactures fabricated pipe fittings